How to Set Up and Calibrate Your Automatic Wire Crimping Machine

Wire twisting is a risky job, but automatic wire crimping machines have made the process of connecting wires together safe for people. These devices save time and ensure a strong connection (or crimp). "Proper Setup and Adjustment of Automatic Wire Crimping Machines For Best Results It is very important to properly set up and adjust your automatic wire crimping machine in order to get the greatest efficiency and maximum number of good cable crimping machine. And today, we’ll show you how to do it on our MIDE automatic wire crimping machine.

The Automatic Wire Crimping Machine Structure

OptionsResolverarehouse: Other hot selling products:

It is imperative to familiarize yourself with parts of the machine before using. It consists of the following major parts:

Feeder: It feeds the wires into the machine.

The stripping unit strips the plastic insulation from the wires.

Cutting Unit: This cuts the wires to the proper length.

Crimping Unit- This component links the wires to each other.

Continue to the Control Panel section: This section allows you to adjust the settings of the machine.

How to Set Up Your Automatic Wire Crimping Machine

To install your MIDE automatic wire crimping machine : First confirm all components are installed. Ensure the feeder has the correct wires. Set the stripping and cutting units to correct setting. Control panel allows user to select the appropriate wire size and crimping machine settings. Once everything’s ready, you’re ready to start using your crimping machine.

Adjusting the Machine For Accurate Crimps

Calibrating your automatic wire crimping machine is vital to ensure the crimps are right and secure. Do this by cutting off a few trial wires from the machine. If the seams aren’t correct, simply change the settings on the control panel. Continue to adjust the terminal crimping machine until you are happy with the mic clusters. After the machine is calibrated, you can use it to work on your projects.

How To Fix Mistakes With Your Auto Crimp Machine

Every now and then, despite good setup and calibration, things can go wrong with machines. Common issues include:

Feeder sticking the wires

Wires not being stripped well

Crimps not holding

The machine not working

If you are experiencing any of these issues, verify that the parts are in the machine. If you require assistance, consult the user manual or contact MIDE customer support.

How to Maintain Your Crimping Machine

To maintain your MIDE automatic wire crimping machine, see to it you inspect it routinely. Clean the device from dust and dirt. Lubricate to prevent damage to moving parts, exchange damaged parts when needed. Feel how the machine works and modify its settings if necessary. You can also ensure that your machine continues making strong and safe crimps by taking care of your machine.